In the process of using the single beam crane, in order to ensure its efficiency and safety, we need to pay attention to some matters. The Shandong single beam crane manufacturer will give you a detailed introduction below.

1. Before the operation of single beam crane, all kinds of lifting tools must be checked to ensure that the lifting tools are complete and in good condition. If the rigger has defects, he cannot carry out the work of lifting crane.

2. In the same way, check the condition of the rope in the single beam crane, and make sure that the rope is firm, not loose or broken. If an object with edges is bound, a protective object needs to be added between the object and the rope to avoid the rope breaking.

3. The single beam crane needs to pay attention to the fact that it is necessary to find out the weight Xin of the heavy object, and the phenomenon of oblique pulling is not allowed. For special lifting objects, the staff need to operate from the side.

4. Don't be too hasty when lifting objects. You must wait a moment until the goods are stable before continuing. It is forbidden to put sundries or stand on heavy objects. During lifting, irrelevant personnel shall not pass under the object.

5. The safety measures for work should be improved. For example, the staff should wear safety helmets, have professional personnel give unified command, and all departments should coordinate their work. When the object is off the ground, it is necessary to check whether the steel wire rope and other parts are safe. If it is unsafe, stop the machine for inspection.

6. The objects that cannot be lifted by the single beam crane shall not stay in the air for a long time.