Product Description:

The electric single beam crane is designed and manufactured according to the standard JB / t1306-1994. It is used together with CDI, MDI and other forms of electric hoists. It becomes a light and small crane with rail operation. Its applicable lifting capacity is 1-16T, applicable span is 7.5-22.5 meters, working level is a3-a5, and the working environment temperature is within the range of -25-＋ 40 ℃. This product is a general-purpose crane, which is mostly used in machinery manufacturing, assembly, warehouse and other places where the frequency of use is low or the number of times of lifting with rated lifting capacity is small. Some: short order cycle, economical; Disadvantages: the effective lifting height is relatively low, the shaking in use is relatively large, and the working level is low, which is not suitable for heavy workshops. The crane is equipped with three operation forms: bottom, control room and remote control. The control room is also equipped with two forms of end face and side door opening for users to choose.

The specification of this product is as follows:

(1) Ground handling

Example: lifting capacity: 3T, span: 10.5m, lifting height: 6m, working level: A3

Representation: ld310.56da3

(2) Operation room control (separate operation room KS and closed operation room BS)

Example: lifting capacity: 5T, span: 16m, lifting height: 6m, working level: A3, open control room operation representation: ld5t S16 H6 A3

This product is widely used in factories, warehouses, stockyards and other different occasions to lift goods. It is forbidden to use it in flammable, explosive and corrosive media.

This product has two operation forms: ground and operation room. There are two types of control rooms, open and closed, which can be divided into two forms of left or right installation according to the actual situation. The entry direction has two kinds of side and end faces, so as to meet the users' choice under different needs.